Ramuc EP Epoxy Pool Paint
Ramuc's EP Epoxy cures to a hard, tough, durable finish, providing stain, chemical and abrasion resistance for protection of concrete, plaster and fiberglass swimming pools, spas and slides. EP Epoxy cures to a high gloss-finish with excellent coverage rates, especially on previously painted epoxy surfaces. EP Epoxy has been a proven performer for more than 50 years. Because of their chemical cure, epoxies are the paints of choice for indoor pools.
Features:
- For use on bare concrete, fiberglass, plaster, and previously painted epoxy
- Protects previously painted epoxy or unpainted surfaces
- This premium low-film build epoxy coating is formulated to provide ease of application and excellent coverage rates.
- Excellent choice for waterpark facilities, including slides
- High solids, high gloss epoxy coating
- Abrasion and chemical-resistant
- Self-priming, two-coat system
- 3 to 4 years of service life
- VOC compliant everywhere in US and Canada
Size:
- Gallon
Specifications:
- Vehicle Type: Epoxy Polyamide
- Finish: High Gloss
- Mix Ration: 2:1 by Volume A:B
- Curing Mechanism: Chemical Cure
- Pot Life: 8 Hours (After Mixing Part A and B
- Working Time: 30-45 Minutes at 75 Degrees Fahrenheit
- Coverage: 175-200 sqare feet per gallon on bare, sandblasted or rough surfaces. 400-450 sqare feet on recoats and fiberglass surfaces
- Application Method: Brush, no thicker than 3/8" Mohair or Lambskin Roller, Airless or Conventional Spray
- Dry Film Thickness Per Coat: Minimum 1.7 mils (2.9 mils wet) Max 2 Mils (3.3 mils wet)
- Application Temp: 50 Degrees Fahrenheit Minimum and 85 Degrees Fahrenheit Maximum
- Number of Coats (2) (Product is Self-Priming)
- Recoat Time: 16-72 Hours. After 72 hours, must sand with 80-100 grit sandpaper before apply second coat
- Dry Time: Outdoor Pool is 5-7 days before filling. Indoor Pool is 10-14 days before filling. Use adequate ventilation
- Shelf Life: 3 Years from date of manufacture
